Lumibricks Shepherds Cottage L9094

Structural Harmony, Light Integration

The central lodge anchors an expansive landscape, its robust SNOT roof geometry cleverly sheltering embedded light conduits. External light points precisely define the fence lines and water flow, demonstrating cohesive illumination architecture across the baseplate. This layered construction establishes immediate visual depth against the abstracted mountain backdrop, inviting closer inspection of its intricate details.

Lumibricks
$134.09
Original
$148.99
10% off code:
⚡ 10 Light Points 100% Pad Printed (No Stickers)
Set # L9094
Released 2026
Pieces 2265
Price / Piece 6.6¢
Figures 4
Age 16+
More at Lumibricks

We may earn a small commission from qualifying purchases at no extra cost to you.

Set L9094 Build Specifications & Overview

Complete build timeline, spatial dimensions, and display footprint analysis.

Value Breakdown

Est. Build Time (*Pieces per minute)
Casual 19.9h 2 ppm*
AFOL (Avg) 10.5h 4 ppm*
Master Builder 6.5h 7 ppm*
⚡ Includes approx. 1.1 hours of dedicated micro-LED wire routing.
Avg Price / Hour
$14.19/hr
Specialty Part Value
Minifigures (4) $20.00
Specialty Tools
Precision Tweezers $2.50
Brick Separator $1.50
Illumination Breakdown
Light Points (10 × $1.00) $10.00
Light Strips (4 × $2.00) $8.00
Power Hub & Cables (Flat) $3.00
Specialty Total $45.00
Price Per Basic Brick
$0.05

Highly valuable! 35% cheaper than average Lumibricks sets.

Display Dimensions

Height 10.7 in (27.2 cm) 28 Bricks high
Width 14 in (35.6 cm) 44 Studs wide
Depth 11.6 in (29.5 cm) 37 Studs deep
Display Footprint 162.4 sq in (1047.7 sq cm) 44 × 37 Studs
Weight 10.78 lbs (4.89 kg)

The Scale Check

Height equivalent to approx 6.8 minifigures stacked.

Display Fit
Standard Shelf Friendly (Kallax/Billy)

Illumination Specs

Tweezers Included 100% Pad Printed
Illumination Density
6.18

Light sources per 1,000 pieces. ↑ 1x higher than average.

Hardware Blueprint
Light Points (Micro-LEDs)
10
Light Strips
4
Power Modes Supported
usb cable, battery case, power bank
Power Requirements
Requires 3x AAA (1.5V), 2x CR2032 (3V) Not Included

Video Showcase