Bricksly Icon

Lumibricks Police Urban Convoy 17008

A heavily armored black and white police vehicle with six wheels and visible glowing lights, shown in a well-lit studio setting with a minifigure standing beside it. The vehicle has a prominent 'DO NOT APPROACH' sign on the front bumper.

Daylight Recon Configuration

This initial assessment reveals the robust 6-wheel chassis, designed for maximum stability in urban patrols. Frontal armor, cleverly assembled with SNOT techniques, securely supports the menacing 'DO NOT APPROACH' warning plate and bright headlamp clusters. The included minifigure is ready to pilot this formidable machine, hinting at dynamic, high-stakes scenarios.

Lumibricks
$49.49
Original
$54.99
10% off code:
⚡ 8 Light Points 100% Pad Printed (No Stickers)
Set # 17008
Released 2026
Pieces 485
Price / Piece 11.3¢
Figures 1
Age 16+
More at Lumibricks

We may earn a small commission from qualifying purchases at no extra cost to you.

Categories: Vehicles Emergency Services Police Interactive & Motorized Play RC & Motor Functions

Set 17008 Build Specifications & Overview

Complete build timeline, spatial dimensions, and display footprint analysis.

Value Breakdown

Est. Build Time (*Pieces per minute)
Casual 5h 2 ppm*
AFOL (Avg) 3h 4 ppm*
Master Builder 2.1h 7 ppm*
⚡ Includes approx. 0.9 hours of dedicated micro-LED wire routing.
Avg Price / Hour
$18.33/hr
Specialty Part Value
Minifigures (1) $5.00
Specialty Tools
Precision Tweezers $2.50
Brick Separator $1.50
Illumination Breakdown
Light Points (8 × $1.00) $8.00
Light Strips (4 × $2.00) $8.00
Power Hub & Cables (Flat) $3.00
Specialty Total $28.00
Price Per Basic Brick
$0.06

Highly valuable! 21% cheaper than average Lumibricks sets.

Display Dimensions

Height 3.03 in (7.7 cm) 8 Bricks high
Width 7.2 in (18.3 cm) 23 Studs wide
Depth 3.54 in (9.0 cm) 11 Studs deep
Display Footprint 25.5 sq in (164.5 sq cm) 23 × 11 Studs
Weight 2.09 lbs (0.95 kg)

The Scale Check

Height equivalent to approx 1.9 minifigures stacked.

Display Fit
Standard Shelf Friendly (Kallax/Billy)

Illumination Specs

Tweezers Included 100% Pad Printed
Illumination Density
24.74

Light sources per 1,000 pieces. ↑ 1x higher than average.

Hardware Blueprint
Light Points (Micro-LEDs)
8
Light Strips
4
Power Modes Supported
battery case
Power Requirements
Requires 2x CR2032 (3V) Not Included

Video Showcase