Lumibricks Graffiti Bus Stop F9066

Graffiti Bus Stop Assembly

The F9066 Street Fusion Graffiti Bus Stop explodes onto the scene with 514 pieces, boasting 2 Lumibricks Light Points and 2 Light Strips. This modular build integrates pad-printed and UV-printed elements, establishing a vibrant urban narrative for its four included minifigures. It’s an expert-level dive into brick art, ready for illumination.

Lumibricks
$46.79
Original
$51.99
10% off code:
⚡ 2 Light Points 100% Pad Printed (No Stickers)
Set # F9066
Released 2026
Pieces 514
Price / Piece 10.1¢
Figures 4
Age 16+
More at Lumibricks

We may earn a small commission from qualifying purchases at no extra cost to you.

Set F9066 Build Specifications & Overview

Complete build timeline, spatial dimensions, and display footprint analysis.

Value Breakdown

Est. Build Time (*Pieces per minute)
Casual 4.6h 2 ppm*
AFOL (Avg) 2.5h 4 ppm*
Master Builder 1.6h 7 ppm*
⚡ Includes approx. 0.3 hours of dedicated micro-LED wire routing.
Avg Price / Hour
$20.80/hr
Specialty Part Value
Minifigures (4) $20.00
Illumination Breakdown
Light Points (2 × $1.00) $2.00
Light Strips (2 × $2.00) $4.00
Power Hub & Cables (Flat) $3.00
Specialty Total $29.00
Price Per Basic Brick
$0.04

Highly valuable! 36% cheaper than average Lumibricks sets.

Display Dimensions

Height 4.7 in (11.9 cm) 12 Bricks + 1 Plate high
Width 7.6 in (19.3 cm) 24 Studs wide
Depth 6.4 in (16.3 cm) 20 Studs deep
Display Footprint 48.6 sq in (313.5 sq cm) 24 × 20 Studs
Weight 2.54 lbs (1.15 kg)

The Scale Check

Height equivalent to approx 3.0 minifigures stacked.

Display Fit
Standard Shelf Friendly (Kallax/Billy)

Illumination Specs

100% Pad Printed
Illumination Density
7.78

Light sources per 1,000 pieces. ↑ 1x higher than average.

Hardware Blueprint
Light Points (Micro-LEDs)
2
Light Strips
2
Power Modes Supported
battery case, usb cable, power bank
Power Requirements
Requires 2x CR2032 (3V) Not Included

Video Showcase